Видео

Thank you. Exactly what I needed!

Thank you !!

Geez, too busy on the eyes when pulling it down. Have you Silhouette shades available where you are ?

Typical setting for domestic hot water is 120 F. Depending on consumption, temperatures below 140 can allow bacterial growth. Add a thermostatic mixing valve set to 120 F with a tank temperature setting of 140 F. As you draw 140 hot water it will be mixed (diluted) with cold to 120 F lowering the tanks consumption thereby extending its capacity; essentially in the case of a 65 gallon heater, behaving like an 80 gallon tank from a supply standpoint. INSULATION on pipes is a must to assist in efficiency and reduce loss in water "down the drain" whilst waiting for it to get hot.

Where did get it?

Really good video about

Excellent

Where do i place the detector on 2014 gmc acadia to detect leak

is it possible in these machine to adjust the level of espresso ( short,middle,long) and is it enough hot coffee ?

I cant get the cap off! I even tried pliers. Don't know what I'm doing wrong, anyone have any tips? 2:17

I love Ceilidh dancing.

Can u make a video on how to drain your water heater if you live in a rental. I've been living in my condo for 5yrs and it's never been drained i would like to drain it myself. Any help is greatly appreciated

Thanks mate

Very helpful, thank you.

My autofeed stopped working and your explanation of how it is put together enabled me to fix the problem. Thought I would have to buy a new one. Thank you

exo to mp4

Thanks for the informative video - much appreciated!

What did you use to edit your video?

Thanks for the review been looking for something like this

I just saw another video saying not to connect it to the red wire because it will cause the unit to leak more water

I agree America is somewhat lacking

the other videos has you removing spool to get the magnets out under the grey cover, this is way easier, thank-you 👍✌🙏

Why not simply have a switch to advance the line when needed , this is a terrible “feature” that wastes line .

Thank you Legend.! Just worked on the spare key for my 2013 Mitsubishi Triton 👍😁

Is this is bi-directional?

No lleva filtro ?

I have same problem coming i change engine mount all now okay 😊

your knowledge is very impressive!!! I came across this machine in a thrift store for only $5!! thankfully it works and coincidentally I bought my boyfriend the philips machine you also have as a gift so it’s great to know that we can use your channel in case we need the info someday!!

Should it work on 2018 outlander? Im having a problem that pressing the lock button - don't lock the doors at all, only mirrors closed. Anyone who can answer I'll appreciate it thx

👏🏻👍🏻

Curious to measure the amp hours and see if it's the full 5.0 claimed? For that you need to discharge the battery through a kilowatt meter, which may require inverting what is probably its DC current to AC. Some of these batts fall short of claimed capacity, even though they plug/play in EGO equipment.

Nice, but not good enough. You have to hold that head, you need to have the position to hold it from above. The best I've seen is from Bosch, IXO collection adapters has a 90" angle one. The adapters lock on several Bosch electric screwdrivers. The problem is that it's... 4 cm. wide. Too wide for my needs. The one you're showing here is 3 cm. wide, it'd be good, but it's not locking in place.

Mine stopped filling in the back

It does not work. I returned it back

How is it working out for you?

This work for me, bro thanks so so much

DAMN! I tried this 3 times today, doesn't work, keeps coming out of the tab/hole... :(

I have the latest rainbow and it's absolute garbage. The seller kept blaming my house for damaging the circuitry inside. He didn't know I was able to check polarity and probe it with an oscilloscope myself. Things would turn up/down by themself, error would occur, sometimes the engines powered down, then I got the crap shocked out of me to the point the motor almost stopped. I got it back from repair twice (still blaming it on the house), and I decided to look at it since he's now saying warranty won't do anything because it's my fault. I found out the neutral is grounded directly to the metal handle. Yes, the one you hold in your band hand while mopping the floor barefoot on a wet floor. I wasted 3 grand, and there is probably a class action just waiting for someone to file it.

What keyboard comes with it

hi. i noticed you say "First Class" and i have not taken Qatar since airlines since 2017 and i will be using qatair airlines from JFK so is there a first class section now? Also, i will be using business class seats, on my trip so is that lounge you went in for people who have an american express credit card that has the priority lounge access? or anyone with a business class ticket can walk in? I only have 2 hours before my next flight to jakarta, Indonesia so im looking for a lounge near the gate I'll be getting into to shower . lol Thanks if you reply.

Great, see you then

Awesome video. thank you

Should I try replacing the whole brew unit? I have the same problem and greatly appreciated your video. I cleaned the brew unit, replaced the gaskets, and greased the moving parts. Still having the excess coffee in disposal tray and soggy/half-sized espresso pucks. I tried to open the full panel, but the bottom, center screw is stripped. Do you have any other suggestions?

That grove you put the line in to stop the auto feed is designed to hold the line in place when you install the spool so the line does not unwind as you insert it. When you pull the trigger it should release and work as normal. For some reason yours is staying in the grove. So unless other people have a broken unit like yours this will not work. So this is a devil with a halo for you. You have a broken unit that would not work as designed but for you this is how you prefer.

YES!

There is also a trans oil cooler filter under the battery tray!

Done the same thing didn't work put the key in ignition to start position but not started and did it work perfectly

Yes,...... must use Teflon tape for tred sealant. But so many people don't put it on

IT LOOKS AS THOUGH THIS SWITCH CANNOT BE INSTALLED HORIZONTALLY & WORK CORRECTLY, HOWEVER IT'S ADVERTISED AS SUCH, WHAT'S YOUR OPINION????

awesome